set order of alsa devices

Again this is primarly a note to myself.
I have a onboard PCI and an USB soundcard. This is how I set the order of the devices:

sonium@raumstation:~$ cat /etc/modprobe.d/alsa-base
alias snd-card-0 snd-usb-audio
alias snd-card-1 snd-intel8x0
options snd cards_limit=2
options snd-usb-audio index=0 vid=0x0763 pid=0x200f
# change v(endro)id und p(roduct)id according to the output of lsusb
options snd-intel8x0 index=1
# --snip--

sonium@raumstation:~$ cat /etc/modules
snd-usb-audio
#--snip--

Now hw(0,0) points to the usb card and hw(1,0) to the PCI card.

Comments

Unknown said…
Hi everybody,,,i've bought a guitar from https://musiquedepot.ca/ .Really it's a very helpful site.So,don't miss it.Thank you.
5:59 PM
guptha said…
Very amazing blog, Thanks for giving me new useful information.
python basics for beginners
python programming tutorials
11:33 AM
Unknown said…
Great post. keep sharing such a worthy information

CCNA Training in Chennai
CCNA Training in Chennai
12:03 PM
David Fincher said…
This post is so interactive and informative.keep update more information...
Hadoop Training in Anna Nagar
Big data training in chennai

5:46 AM
Reshma said…
This post is so interactive and informative.keep update more information...
content Writing Training in Bangalore
content Writing course in Bangalore
11:23 AM
Pavithra Devi said…
This post is so interactive and informative.keep update more information...
Angularjs Training in Tambaram
Angularjs Training in Chennai
6:27 AM
Post a Comment

Popular posts from this blog

Help me to improve support texts

Hi, under the hood the wizard now is quite finished. But as I'm not a native English speaker I need your help at improving the support texts given inside the wizard. They are, as Robert stated a bit to formal and stiff. I really would be glad if some of you could have a look at the wiki page , where you can edit the texts.
Read more

Workshop Project: Hot Wire Anemometer

Image
I just want to present my project I built as an own project in the electronics workshop hold at my university, that really has been quite interesting. Its a so called "Hot Wire Anemometer" (Airflow-meter). Here you have the explanation as an excerpt of the project documentation: Die Idee beim Hitzdrahtanemometer ist den Wärmeverlust an einem Glühfaden zu bestimmen und dadurch auf die Geschwindigkeit des kühlenden Luftstroms zu schließen. Um den Wärmeverlust messen zu können wird die Widerstand – Temperatur Abhängigkeit des Glühdraht benutzt um diesen auf einer konstanten Temperatur also Widerstand zu halten. Schließlich wird der dazu notwendige Strom, bzw der Spannungsabfall am Glühdraht gemessen, verstärkt und ausgewertet. Although we had a bunch of problems in the end everything worked very well and was a nice combination on analog and digital elements. As a hot wire we used a 6V light bulb where we took off the glass.
Read more

Dry-Ice Canon fun

Image
Use frozen carbon dioxide (dry ice), mix it with water and pipe the steam into a PET bottle. When the bottle at roughly 22bar explodes you can shoot for example a toy chicken over more than 80 meters (We had serious problems to build a projectile that is not destroyed by the power of the launch). We built the device for a creativity competition at our university. And well, we could not place an object accurate on 20m but for shure we did it with the biggest impact. Music on Amazon and iTunes If you are curious, here some detail about the construction: For us secure handling was not only an option. We have seen some people that put water and dry-ice together into an bottle close it and put it into a pipe. But you have good chances that it will explode in your hands. So we put an PET bottle into our pipe and connect it with an CNC made adapter to the presure reservoir outside. Beside that, all parts are made from steel and welded. We experienced that a 1.5l coke bottle (actually we used
Read more